Sanding and Polishing

Re-Coating Floors: Prep wash, light sand and apply 1 or 2 coats depending on the condition of the floor or the coating previously used.

New and Old Floors: Preparation for sanding and coating the processes we undertake are in 3 stages.
Stage 1: Punch down joist nails, rough sand timber floor, putty nail holes and butt joints where required, medium sand floor, sand the edges and corners. Fine sand and Vacuum the floor, , then apply the first coat.
Stage 2: After the first coat is dry, check the putty, light sand and vacuum the floor, then apply 2nd coat.
Stage 3: After the second coat is dry. Light sand and vacuum the floor, and then apply the final coat.


welcome img